Omnetics 32ch Probe to X3 Headstage Adapter

>

>

Omnetics 32ch Probe to X3 Headstage Adapter

No items found.

Omnetics 32ch Probe to X3 Headstage Adapter

Information

designed to interface X3R32/64 headstages with probes that have a 32-channel Omnetics connector. The original version includes a screw-locking mechanism while maintaining a compact footprint. No locking-offering a minimal footprint for space-constrained setups./ Vertical-raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

Configuration

Resources

You may also like

X6 Cycle Extender

This adapter is designed as a disposable component for use with X6 headstages, helping to reduce wear and tear on the headstage connector from repeated connection cycles.

X3 Cycle Extender

This adapter is designed as a disposable component for use with X3 headstages, helping to reduce wear and tear on the headstage connector from repeated connection cycles.

X3 32ch Jumper Cable

This is a pin-to-pin jumper cable designed to extend the electrodes up to 2 cm away from the headstage.

X6 Cycle Extender

This adapter is designed as a disposable component for use with X6 headstages, helping to reduce wear and tear on the headstage connector from repeated connection cycles.

X3 Cycle Extender

This adapter is designed as a disposable component for use with X3 headstages, helping to reduce wear and tear on the headstage connector from repeated connection cycles.

X3 32ch Jumper Cable

This is a pin-to-pin jumper cable designed to extend the electrodes up to 2 cm away from the headstage.

NeuroNexus X3 Dual 16ch Probe Adapter

This adapter remaps one of the 32ch X3 input connector to use two 16ch NeuroNexus X-series probes.

Adapter X6 to Dual X3

This adapter is designed to convert the 128-channel X6 headstage inputs into two 64-channel X3 inputs, allowing the use of X3 accessories and probes.

XDAQ™ to Smartlink Adapter

This adapter is designed to enable the XDAQ system to interface with NeuroNexus Smartlink headstages and cables.

XDAQ™ to Intan RHS Headstage Adapter

This adapter is designed to allow the XDAQ to drive Intan's RHS headstages using Stim SPI cables.

XDAQ™ to Intan RHD Headstage Adapter

This adapter is designed to enable the XDAQ to drive Intan's RHD headstages using SPI cables.

XDAQ™ DB25 BNC Breakout Board

This breakout board is designed to make the I/O pins and signals from XDAQ's DB25 connector more easily accessible through BNC connectors.

X-Headstage™ to Smartlink Adapter

This is the probe-side adapter designed to convert the X-Headstage for use with NeuroNexus's Smartlink cable and Smartbox systems.

XDAQ™ SR64 Active Adapter

This is an active adapter designed for use with the X3SR64 headstage, utilizing a single KonteX HDMI cable.

XDAQ™ Port Expander

This adapter allows each XDAQ HDMI port to drive up to four headstages, providing independent and isolated power and ground circuits for each.

RHS HDMI Cable to Intan System Adapter

This adapter enables X-Headstages with KonteX HDMI cables to connect to the Intan Stimulation/Recording Controller via the Stim SPI cable.

RHD HDMI Cable to Intan System Adapter

This adapter enables X-Headstages with KonteX HDMI cables to connect to the Intan Recording Controller or the Open-Ephys acquisition box via the SPI cable.

IO Expander DB25 BNC Breakout Board

This breakout board is designed to make the I/O pins in the XDAQ IO Expander's DB25 connector more easily accessible via BNC connectors. The same board is compatible with both the digital input and digital output DB25 connectors.out DB25 connector can be used.

X3R32 Adapter to Pin Header 32ch

Use this adapter to interface with the 32-channel 1mm socket EIB. This adapter is compatible with both X3R32 and X3R64 headstages.

X3 Adapter to Pin Header 16ch

Use this adapter to interface with the 16-channel 1mm socket EIB. This adapter is compatible with all X3 headstages, including X3R and X3SR models.

Omnetics 64ch Probe to X3 Headstage Adapter

This adapter is designed to interface X3R64 headstages with probes that have dual 32-channel Omnetics connectors.

Omnetics 32ch Probe to X3SR Headstage Adapter (Vertical Design)

This adapter is designed to interface X3SR32 headstages with probes that have a 32-channel Omnetics connector. The vertical design raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

Omnetics 32ch Probe to X3 Headstage Adapter (Vertical Design)

This adapter is designed to interface X3R32/64 headstages with probes that have a 32-channel Omnetics connector. The vertical design raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

Omnetics 32ch Probe to X3SR Headstage Adapter

This adapter is designed to interface X3SR headstages with probes that have a 32-channel Omnetics connector. This version includes a screw-locking mechanism while maintaining a compact footprint. /Vertical-raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

Omnetics 32ch Probe to X3 Adapter No Locking

This adapter is designed to interface X3R32/64 headstages with probes that have a 32-channel Omnetics connector, offering a minimal footprint for space-constrained setups.

Omnetics 16ch Probe to X3 Headstage Adapter (Vertical Design)

This adapter is designed to interface X3R32/64 headstages with probes that have a 16-channel Omnetics connector. The vertical design raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

SR Headstage Remapper

This adapter is used with X3SR32 headstages to enable compatibility with standard probe adapters that do not have an SR designation. Additionally, it functions as a connector cycle extender for the X3SR32 headstages during use.

MEA Enclosure

The metal enclosure features thumbscrews for easy MEA installation and moisture-resistant gaskets, supporting the use of two X3/X6 headstages.

MEA Adapter for MCS 8x8

This adapter is designed to interface with the 8x8 MEA from MCS. A moisture-resistant coating has been applied to allow use in cell incubators with elevated moisture and temperature conditions.

Omnetics 16ch Probe to X3 Headstage Adapter

designed to interface electrodes equipped with a 16-channel Omnetics connector to the X3R X-Headstage. /No locking-to minimize size, it is designed without locking screw sockets. /Vertical-raises the connector, creating additional space near the craniotomy and potentially allowing more room for implants.

Omnetics 16ch Probe to X3 Adapter No Locking

This adapter is designed to interface electrodes with a 16-channel Omnetics connector to the X3 X-Headstage. To minimize size, it is designed without locking screw sockets.

Acute 64ch Probe to X3 Headstage Adapter

This adapter is designed to interface electrodes equipped with two Samtec MOLC 40-pin connectors to the X3 X-Headstage.

Acute 32ch Probe to X3 Headstage Adapter

This adapter is designed to interface electrodes equipped with one Samtec MOLC 40-pin connectors to the X3 X-Headstage.

Acute Probe to X3 Headstage Adapter

16ch probe-designed to interface electrodes equipped with 16-pin DIP connectors to the X3 X-Headstage. 32ch probe-designed to interface electrodes equipped with one Samtec MOLC 40-pin connectors to the X3 X-Headstage. 64ch probe-designed to interface electrodes equipped with two Samtec MOLC 40-pin connectors to the X3 X-Headstage.

No items found.